AKEEYO XPRO Brings Hidden 4K Dash Cam to RAV4

AKEEYO XPRO Brings Hidden 4K Dash Cam to RAV4

AKEEYO Global has introduced the XPRO, a vehicle-specific dash cam designed to integrate directly into select Toyota RAV4 models rather than hanging from the windshield like a typical aftermarket camera. The new model combines 4K recording with a Sony STARVIS 2 sensor, while its replacement mirror housing hides the camera and power connection behind the rearview mirror. The approach targets RAV4 owners who want video evidence on the road without adding visible mounts and dangling cables to the cabin.

4K Sony STARVIS 2 Imaging Targets Difficult Lighting

At the center of the XPRO is a Sony STARVIS 2 IMX678 image sensor paired with an F1.08 aperture. It records 4K video at 25fps and supports HDR, a combination intended to preserve useful details when lighting conditions change quickly. Situations such as entering or leaving tunnels, driving at night, or dealing with bright headlights are particularly challenging for small automotive cameras because both highlights and darker areas need to remain usable in the same frame.

AKEEYO says its IMX678 sensor is sourced through authorized channels and that Sony has provided written confirmation of the component used in the camera. That documentation is noteworthy in a dash cam market where sensor model numbers can be an important purchasing criterion but are not always independently documented. The larger F1.08 aperture should also allow more light to reach the sensor, although actual license-plate readability will still depend on factors such as distance, movement, lighting, and environmental conditions.

Factory-Style Installation Is the Main Differentiator

The XPRO’s more unusual feature is not its resolution but how it fits into the RAV4. Instead of using a suction or adhesive windshield mount, the camera replaces the original mirror cover and takes power from a connection point near the mirror. AKEEYO estimates installation at around four minutes, with no drilling, cutting, wire splicing, or fuse-box connection required for normal driving recording.

The supplied trim tool is used to remove the factory cover before connecting the included adapter and installing the XPRO housing. The modification is reversible, which could be useful for leased vehicles or owners who want to restore the original configuration before selling their RAV4.

Fitment requires more attention than a universal camera, however. AKEEYO offers two housing designs because RAV4 mirror assemblies vary. The non-vented version supports select 2019-2024 RAV4 models and the 2022 RAV4 Prime, while the vented version supports select 2022-2025 vehicles. The company recommends checking the housing against its reference images rather than assuming compatibility based only on model year.

Supercapacitor and Fast Wi-Fi Address Everyday Use

Instead of a conventional lithium battery, XPRO uses an automotive-grade supercapacitor. This makes sense for hardware permanently installed inside a vehicle, where cabin temperatures can become much higher than normal consumer-electronics operating conditions. AKEEYO specifies an operating range from -4°F to 158°F (-20°C to 70°C) and uses a six-layer ENIG circuit board with gold-finished contacts.

For recording management, the camera supports loop recording and a three-level G-sensor that can protect the current clip after an impact. Voice commands can capture a photo or lock a recording without requiring the driver to physically reach for the unit, while spoken alerts provide status information for recording, Wi-Fi, audio, and storage.

Dual-band 2.4GHz and 5GHz Wi-Fi connects the camera to the AKEEYO app for live viewing, playback, and file transfers. AKEEYO quotes download speeds of up to 20MB/s under suitable conditions. That can be particularly useful after an incident because footage can be transferred to a phone without removing the microSD card.

Parking Monitoring and the Single-Channel Limitation

The standard XPRO installation focuses on recording while the vehicle is running. Owners who need surveillance while parked can add an ACC Hardwire Kit or OBD Power Cable. These accessories enable time-lapse parking monitoring, impact protection, and a low-voltage cutoff intended to prevent excessive drain on the vehicle battery. An optional GPS Module can additionally record route, speed, direction, location, and time for synchronized playback with video.

There is one important limitation for buyers considering the XPRO as a complete vehicle recording system: it is a front-facing single-channel camera. No rear camera is included. That makes the product more appropriate for RAV4 owners prioritizing discreet integration and forward-facing recording than drivers specifically looking for front-and-rear coverage.

The XPRO includes a 64GB microSD card and supports storage capacities up to 256GB. It is available in North America for $289, with an introductory XPRO25 code offering 25% off the camera and XPRO accessories. The package also includes the compatible mirror power adapter and installation trim tool, while AKEEYO Global provides a 30-day money-back guarantee and an 18-month replacement warranty.

SpecificationAKEEYO XPRO
Vehicle CompatibilitySelect Toyota RAV4 models
Camera ConfigurationFront-facing, single channel
Image SensorSony STARVIS 2 IMX678
Video Resolution4K at 25fps
ApertureF1.08
HDRYes
InstallationReplacement rearview-mirror housing with mirror-area power connection
Power StorageAutomotive-grade supercapacitor
Operating Temperature-4°F to 158°F (-20°C to 70°C)
Wi-Fi2.4GHz and 5GHz dual-band
Maximum Stated Download SpeedUp to 20MB/s under suitable conditions
Included Storage64GB microSD card
Maximum Storage256GB
G-SensorThree-level
Voice ControlPhoto capture and clip locking
Optional AccessoriesGPS Module, ACC Hardwire Kit, OBD Power Cable
Parking MonitoringOptional power accessory required
Price$289 USD

Leave a Reply

Your email address will not be published. Required fields are marked *